The Calm BEFORE the Storm

Stormscope Weather Mapping Systems were the first airborne instruments developed specifically to detect and map thunderstorms by analyzing the radiated signals of electrical discharges from storm cells. During the cumulus stage of a thunderstorm, storm cells are usually precipitation-free, and weather radar is unable to show activity. Stormscope, by detecting the electrical activity already present as the storm builds, provides an accurate view of areas that should be avoided. Stormscope processes both azimuth and range to determine the location and intensity of dangerous thunderstorm cells – then presents the findings in real-time.

Stormscope Series Key Features

Plots lightning as it happens, before the onset of precipitation
Displays lightning in 25, 50, 100 and 200 nmi ranges
Pilot selectable Cell and Strike modes
360-degree view or 120-degree forward looking
Updates lightning information every second
Strike Rate indicator details building or dissipating storms
Integrates with SkyWatch Collision Avoidance Systems

Like all Stormscope systems, the WX-1000 Series provides early detection of storm cells, and displays lightning at ranges up to 200 nautical miles. Simply turn your system on and monitor thunderstorm activity even before you leave the ground. Pick four selectable ranges, two separate views, a built-in checklist, and a timer to keep track of your elapsed time on approach. The WX-1000E Series can be configured to display lightning on an EFIS or radar indicator.

360° or 120° selectable view out to 200 nm range
Interfaces with SkyWatch® and SkyWatch® HP Traffic Advisory Systems
Electrical discharge information stored on all ranges simultaneously
"CLEAR" function helps determine whether cells are building or dissipating
Optional dedicated high resolution CRT display
Six installer-programmable checklists
Used by the military as the AN/AMS-2 and carries national stock numbers (1, 2)
Heading stabilized when configured with a compatible heading system (1, 2)
Available with ARINC 429 EFIS output (2)
Creates Loran/GPS-generated Course Deviation Indicator (CDI) (2)

(1)Model WX-1000+ features
(2)Model WX-1000E features

System Specifications

Dimensions:	WX-500:	WX-1000:
Display		3.37" (8.6 cm) high 3.37" (8.6 cm) wide 8.25" (21 cm) deep
Antenna	1.00" (2.54 cm) high 3.5" (8.76 cm) wide 6.9" (17.40 cm) long	1.13" (2.9 cm)high 4.49" (11.4 cm) wide 10.06" (25.6 cm) long
Processor	(including mouning tray and pull handle) 5.6" (14.22 cm) high 2.2" (5.59 cm) wide 12" (30.48 cm) deep	3.38" (8.6 cm) high 4.88" (12.4 cm) wide 12.67" (32.2 cm) long
Weight:
Processor	(including mounting tray) 2.5 lbs. (1.13 kg)	(including mounting tray) 6.67 lbs. (3.02 kg)
Display		2.28 lbs. (1.03 kg)
Antenna	(without doubler) 0.84 lbs. (0.38 kg)	(with doubler) 2.0 lbs. (.91 kg)
Total System		10.95 lbs. (4.96 kg)
Electrical Characteristics:
	Input Voltage; 11 to 32 VDC Current: 0.82 A (maximum) @ 12 VDC 0.38 A (maximum) @ 28 VDC	Input Voltage: 10.5 to 32 VDC Power Consumption: 28 Watts Gyro Excitation (400 Hz): 5-50 Volts-pk
	Radar indicator (using RGC350)	Radar indicator (using RGC350)
	Multi-function display**	Multi-function display**
	ARINC 429 EFIS	ARINC 429 EFIS
Specification Compliance
	Complies with FAA TSO C110A	Complies with FAA TSO C110A
Environmental Characteristics
	Remote Processor:	Processor:
	Operating temperature range: -55 to 70°C (-67 to 158°F)	-55°C (min), 70°C (max).
	Operating altitude: 55,000 feet MSL maximum	Display: -20°C (min), 55°C (max)
Antenna:	Operating temperature range: -55 to 70°C (-67 to 158°F)	-55°C (min), 70°C (max).
	Operating altitude: 55,000 feet MSL maximum	Operating altitude: 55,000 feet MSL maximum

WX-1000 Stormscope FEATURES & BENEFITS:

>360° or 120° selectable view out to 200 nm range
> Interfaces with the L-3 SkyWatch® and SkyWatch® HP Traffic Advisory Systems
> Electrical discharge information acquired and stored on all ranges simultaneously
> “CLEAR” function aids in determining whether storm cells are building or dissipating
> Optional dedicated high resolution CRT display with adjustable brightness control
> Six installer-programmable checklists
> Recognized by the military as the AN/AMS-2 and carries national stock numbers (1,2)
> Heading stabilized when configured with a compatible heading system (1,2)
> Uses an RS232 or RS422 input from a compatible Loran/GPS (2)
> Available with ARINC 429 EFIS output (2)
> Creates Loran/GPS-generated Course Deviation Indicator (CDI) (2)

(1) Model WX-1000+ features
(2) Model WX-1000E features

STORMSCOPE® MODEL WX-1000

Now you don’t have to be a meteorologist to forecast the weather. Like all Stormscope systems, the WX-1000 Series provides early detection of storm cells, and displays lightning at ranges up to 200 nautical miles. Simply turn your system on and monitor thunderstorm activity even before you leave the ground. Pick four selectable ranges, two separate views, a built-in checklist, and a timer to keep track of your elapsed time on approach. The WX-1000E Series can be configured to display lightning on an EFIS or radar indicator.

Whether you are a commercial pilot flying an all glass cockpit or a General Aviation pilot with a traditional panel, Stormscope fits the model that suits your needs. Whether viewing on a dedicated display or overlaying the information on a moving map, Stormscope offers the most display options of any weather provider. With its multiple output options, Stormscope keeps pilots informed of lightning strikes the second they happen. Stormscope is certified and flying with almost every display manufacturer. The list is growing everyday, so please call your L-3 Avionics Systems representative at 1-800-253-9525 to find out if your display will support Stormscope.

WX-1000E Display Options

- Rockwell Collins Pro Line IV, Pro Line 21, Late model EFIS-85/86
- Universal Avionics EFI and MFD series
- Bendix King EFIS 40/50
- Honeywell KMD870/540

See what customers say about the Stormscope Systems to L3 Avionics!